Re- Multipurpose Vessel Project
We need the following marine unit as new building within short time.
Please explain:-
Idea budget amount
Time of delivery
MULTI-PURPOSE VESSEL PROJECT
1. Tanker for two grades about 3000 MT.
2. Bulk carrier/general cargo hold about 2000-3000 Tons
3. Deck and hatch container carrier about 3000 Tons
Vessel should specifications:
1. Low draft as much as possible.
2. Two hatches.
3. One pump room of min two cargo pumps of discharge not less than
500 M.T/hr
4. Mid crane of cap. 50 M.T.
5. Double bottom ballast tanks/fuel consumption tanks.
6. Megregory hatch covers with containet locks at top.
7. Total DWT 7000-8500 DWT.
8. Tank washing system, heating coils, inert gas.
9. Oil cargo tanks to be at the top of db tanks with manholes at
sides. Prefered to be p & sb (no center tanks) suggesting 3 x 2 = 6
tanks.
10. Vessel to be classed by IACS association and comply with all IMO
regulations of Marpol, Panama and Suez standards of tonnage and all
international rules.
Thaking you,
Fareed Al Abdeen
From Sharjah, United Arab Emirates
|
