we can help you find the financing for new building ship, if you build new ship
in China.
DESCRIPTION QTY TECH. SPEC
1.00 DECK MACH/OUTFIT
1.01 Anchor windlass 1 8 Tons @ 12M /min
1.04 Deck Crane (escopic Type) 1 SWL 3 Ton (2.8M-18M), 15Ton (2.8M-6M)
1.05 Tugger Winches 2 7 Tons @ 12M /min
1.06 Towing & Anchor Handling winch 2 70Ton @ 1st layer, brake holding 150T
1.07 Towing Pin & shark Jaw 1 SWL- 100T & 150T hydraulic operated
1.08 Mooring winches 4 30Tons pull @ 10M /min, brake holding 75 Ton
1.09 Mooring anchors 4 3000kg flipper delta
2.00 MACHINERIES
2.01 Main engine 2 2500HP @ 720 RPM, Yanmar, 6N280-EN
2.02 Steerable thruster (FPP) 2 2500HP @ 720 RPM, KHI, KST-200ZF/A
2.03 Tunnel Thrusters (CPP) 2 350KW C/W 4 BLADES SKEW PROP, 5.5T thrust KHI,
2.04 Generator 3 400KW20/3/50, 1500RPM CAT/CUMMINS
2.05 Harbour Generator 1 120KW20/3/50, 1500RPM
2.06 Emergency Generator 1 90 KW, 420/3/50
2.07 Air compressor 2 14.5M3/HR F.A YANMAR
2.08 Air receivers 2 200 LITRES
2.09 Bilge/ballast pump 1 60M3/HR AT 5 bar, CI CASING :- 22KW
2.10 General service/Fire pump 1 60M3/HR AT 5 bar, CI CASING :- 22KW
2.11 F.O transfer pump 1 20M3/HR AT 20MH :- 5.5KW
2.12 Fuel oil cargo pump 1 50 M3/hr at 70 m head:- 30KW
2.13 Fresh Water cargo pump 1 50 M3/hr at 70 m head :- 30KW
2.14 Drill water pump 1 70M3/hr @ 70m head ;- 37KW
2.15 Main engine standby lub oil pump 1 suit engine requirement
2.16 Main engine standby fresh water pump 1 suit engine requirement
2.17 Bulk tank compressor 2 Rotary compressor 500CFM @ 5.5bar
2.18 Bulk tanks c/w all accessories etc. 4 1250 cu ft each, total 5000 cu ft,
W.P: 5.5 bar
2.19 Air receiver for bulk sys 1 apppx. 900 lits
2.20 Emergency fire pump 1 35M3/HR at 60MH
2.21 F/W & S/S pressure set 2 6 M3/HR, 30 M H C/W 300 LITRS TK :- 4 KW
2.22 Calofier 1 120 US GALLONS
2.23 Oily water separator 1 1.0M3/HR AT 2KG/CM2
2.24 MDO PURIFIER 1 RATED AT1400L/HR. MANUAL TYPE
2.25 Lube oil purifier 2 RATED AT 800L/HR,MANUAL TYPE??
2.26 Sewage treatment plant 1 60 MEN capacity
2.27 Ventilation system and fans 1 LOT HISON
2.28 A/C equipment 1 set outside: 40degC 90% R.H & Inside 26dg C,50% R.H
2.29 U V sterilzer 1
2.30 Dirty oil /sludge pump 1 2 M3/HR X 30 H
2.31 Water maker 1 25 Ton/day
2.32 Liquid Mud pump 50M3/hr at 75M H:- 75KW
2.33 Workshop facilities compressor 1 5 std m3/min, max/min del. Press. 12
bar/7bar
our shipyards build custom AHTS and PSV as customer requirements. |
