Floating Docks
Length x In. Width (m) Lifting Cap.(Ton) Cranes (ton)
No.1 155 x 23.4 8500 5
No.2 129.4 x 23 6500 5 & 10
Engine & Machinery Works
Overhauling and adjusting for each type of main and aux. engine, Overhauling
for class. survey, Turbo-charger overhaul & balancing test, Compressors and
pumps overhaul and repair, Machinery installation and hyd. motors overhaul and
repair, Refrigerator system repair, Control & monitoring system repair,
Electric equipment repair & cabling, Heat exchanger cleaning & retubing,
Boiler tube renewal and repair.
Steel Structure Works
Renewal work for shell, deck plates & bulkhead, internal members etc., Renewal
and reinforcement for crack or buckling area, Reinforcement underneath for
structure of deck machinery, Installation and partial renewal for various
steel out fittings and structure of deck machinery, Hatch cover repair and
packing renewal, Cargo gear and crane overhaul and load test, Deck machinery &
hyd. system overhaul & repair, Piping line renewal and repair, Safety
equipment repair and renewal, N.D.T. and thickness gauging for class survey.
Reconditioning & Machinery Work
The major reconditioning items are as below:
Piston crown, Cylinder head, Cylinder liner, Remetal of various bearing,
Metalizing of various shaft.
Manufacturing & Machinery Works
Australian & inclining ladder, Ventilator head, Machinery seat & bed, Hatch
cover & fittings, Cargo derrick & crane boom & fittings, Opening door &
grating, Container fittings, Various tank & portable tank, Various steel
structure and ship steel outfittings, Machining of various shaft, Machining of
flat and liner plate, Various flanges.
In-Water Survey & Salvage
We can perform survey works on behalf of the classification societies and make
report with video or still camera photographs for designated area by monitor
system(CCTV) and we also perform emergency patching work or salvage work.
In-Water Hull Cleaning & Propeller Super-Polishing
By using cleaning gear, underwater hull cleaning and propeller super-polishing
of V.L.C.C can be done within 24 hours during vessel's loading or discharging,
and it brings fuel saving effect by decreasing hull resistance, by minimum
cost with maximum effect.
Supervision & Engineering
By utilizing live information through our close contact with Korea new
building yards like Hyundai Heavy Industries Co., Ltd., we can cope with any
kind of challenge which might cause during the vessel's voyage.
At the same time, we have concerted cooperative network with well-know
maritime research institutes to respond owner's any request for local site
inspection and new building supervision for their vessels.
Spare Parts Supply
We supply various spare parts in close cooperation with over 200 professional
domestic spare parts manufacturing companies as well as our ovvn company. |
